INFICON Cygnus 2 Thin Film Deposition Controller - Manual (Page 184)

9 - 36
IP
N 07
4-
54
5-
P1
E
Cygnus 2 Operating Manual
7
(0x07)
Status Message
Designators Message
Word>
8 bytes
1-13
(Can have
12 DAC
recorders)
|
....
Status Message Word
corresponding to one of
the status messages,
as encoded in the SG 6
command.
This indicates which status message designators are to be returned. Note that only one bit may
be set, that is, only the designators for one error can be requested per command.Returns a string
of bytes. First byte is the number of bytes following. The following bytes indicate the designators
for the requested status message.If there are no designators, the first byte returned will be zero.
9
(0x09)
Transient
Messages
1 See encodes in section
13.4 on page 13-6 .
10
(0x0a)
Sensor Status 6 One byte for each
Sensor Range between
0 and 5.
0 = Good Crystal and active. 1 = Failed Crystal and active. 2 = Invalid Measurement on Crystal
and active. 3 = Good Crystal and inactive. 4 = Failed Crystal and inactive.
5 = Invalid Measurement on Crystal and inactive.
11
(0x0b)
Timer Status Timer Number
1 - 20
1 Response:0 = Timer
inactive1 = Timer active
12
(0x0c)
Timer Value Timer Number
1 - 20
4 Response is in tenths of
seconds. Max Time =
99:59:59.0 (3599990
tenths of seconds)
13
(0x0d)
Counter Value Counter
Number
1 - 20
4
14
(0x0e)
Thickness Sum Equation
number
0 - 3
4 or 12 or 0 = All thickness
equations
1 - 3 = the number of
the equation to return.
15
(0x0f)
Get date 12 Integers for month, day,
year or day, month
year, depending on
date format general
parameter.
Table 9-12 Status general commands (continued)
SG
Comm
and ID Description Option
Number
of bytes
in the
response
Data Returned Notes