INFICON Cygnus 2 Thin Film Deposition Controller - Manual (Page 127)

7 - 1
IP
N 07
4-
54
5-
P1
E
Cygnus 2 Operating Manual
Chapter 7
Digital I/O
7.1 Digital I/O Screen
The Digital I/O screen is selected by moving the cursor on the Main Menu screen
to Digital I/O and pressing Menu. The I/O Map display for board 1 is shown in
Figure 7-3 on page 7-3 . Upon entry the cursor will be placed at the last referenced
output or input number.
7.2 All Input Page
Figure 7-1 All input page
All input names assigned by the Cygnus 2 or by the user are shown to facilitate
system diagnosis. Darker font color designates inputs that are currently active.