ETC Element v2.1.0 - Manual (Page 169)

12
Using Moving Lights and Palettes 157
Editing Palettes in Spreadsheet View
Spreadsheet view shows a range of palettes along the Y axis and channels and channel
parameters along the X axis. Viewing palettes in spreadsheet view is useful when you want to
compare data between palettes.
You may select a palette from the spreadsheet using the [Next] or [Last] keys to move through the
list or you may select the exact palette from the keypad. You may also select a range of palettes to
edit at once. You can make changes to the palette(s) by selecting channels and altering parameter
values. In addition to normal editing functions, you may also use the following commands in this
view: [Copy To], {Make Absolute}, Move To (accessed by pressing [Copy To] [Copy To]), and
{Replace With}.
The following are representative methods used for editing palettes in blind spreadsheet:
• {Color Palette} [1] [Thru] [9] [Enter] - selects color palettes 1 through 9.
• [1] {Scroller} [4] <0> [Enter] - sets channel 1 scroller value to 40 in the selected color palette.
In addition to the examples given above, here are some examples of the additional palette editing
features you have while editing in spreadsheet view:
• [palette type] [1] [Thru] [5] [Copy To] [Copy To] <palette type> [9] [Enter] - this will
move palettes 1-5 to palettes 9-14 respectively. You do not have to supply the end value for
Element to perform the move.
Deleting Palettes
To delete color palette 1, press [Delete] {Color Palette} [1] [Enter] [Enter]. When palettes are
deleted, any references in cues will be converted to absolute data.