Deleting cues, In track mode, In cue only mode – ETC Element v2.1.0 User Manual
Page 137: In track mode in cue only mode
9
Working with the Cue List
125
Deleting Cues
Cues or ranges of cues can be deleted. When deleting cues, the track/cue only setting of the
console will determine how subsequent cues are affected. The [Cue Only/Track] button can be
used to modify the default behavior as needed.
In Track Mode
When the console is in track mode, deleting a cue also removes any move instructions provided by
the cue. For example, assume you have stored cues 1-10 and cue 5 contains move instructions for
channels 1-5. If cue 5 is deleted, the move instructions are deleted as well, and the values from cue
4 will track directly into cue 6 and beyond.
In this instance, if you used the [Cue Only] button in the delete instruction, cue 5 would be deleted,
but the tracked values in cue 6 that originated in cue 5 would remain and be converted to move
instructions.
In Cue Only Mode
When the console is in cue only mode, any subsequent tracked values are not eliminated, but are
converted to move instructions instead.
In the example above, deleting cue 5 (in cue only mode) would result in any tracked values in cue
6, that originated in cue 5, being converted to move instructions.
If you apply the [Track] button to the delete instruction, the move instructions from cue 5 are
deleted and the values from cue 4 would then track into cue 6 and beyond.
Some examples of cue deletion are:
• [Delete]
depending on the console default setting as described above.
• [Delete]
default setting, as described above.
• [Delete]
• [Delete]
3 of cue 8, making exception to the default setting, as described above.
• [Group] [1] [Delete]
remains in the cue list and any channels not in group 1 are unaffected.
• [Delete]
exception to the default setting, as described above.