ETC Element v2.1.0 - Manual (Page 138)

126 Element User Manual
Using the Cue List Index
The cue list index is a blind display list which shows the cue list, the cue status, and cue attributes.
All cue attributes can be edited from the list including whether the cue list is set to independent or
not, and if the intensity values in the cue list will play back as HTP or LTP. While cue attributes can
be changed in live or blind, independent and HTP/LTP settings can only be set in the cue list index.
Open the Cue List Index
You can access the cue list index by pressing [Cue] [Cue], or you can navigate within the browser
to Record Target Lists > Cue List Index and press [Select].
Cue Attributes
Cue list attributes determine how the cue list will interact. Assigned attributes will display at the top
of the cue list.
Cue list attributes include:
• Fader type (Proportional, Manual Master, or Intensity Master)
• Independent (default is not enabled)
• Intensity HTP or LTP setting (default is LTP)
• Background
• External Links
When [Cue] [1] [/] is on the command line, the following cue list attribute softkeys are available:
{HTP/LTP}, {Independent}, {Background}, {Time Code}, {Fader}, and {Autoblk Cln}.
HTP/LTP
The {HTP/LTP} softkey is a toggle state between LTP (latest takes precedence) and HTP (highest
takes precedence). For more information on HTP/LTP see
HTP vs. LTP, page 236 .
All parameters other than intensity are LTP.
Intensity, by default, is also LTP. Cue lists can be set with an HTP intensity override. When the cue
list is set to HTP, intensity values provided will override the LTP value (of which there can be only
Assigned Cue Attributes