ETC Element v2.1.0 - Manual (Page 150)

138 Element User Manual
Introduction to Playback
Cues are played back using the master playback fader pair.
The master playback fader pair is located to the left of the control keypad. The master is a split fader
pair. The left fader controls the intensity upfade, while the right fader controls all intensity downfade
actions. The two buttons beneath the master fader pair are [Go] and [Stop/Back]. The [Load]
button is located directly above the fader pair.
Playback Controls
Grandmaster and Blackout
If a grandmaster is set to a value other than 100%, a grandmaster button
with the set value will be shown at the top of each display. If blackout is
currently on, a blackout button will be shown at the top of the displays.
Clicking on either button will open a new display which will allow you to
turn off blackout and set the grandmaster to a different level.
Load button
Master
fader
pair
Stop/Back
Button
Go button
Grandmaster