HP Hitachi Dynamic Link Manager Software - Manual (Page 87)

3. Creating an HDLM Environment
63
Note:
In this manual, Windows running on a 32-bit processor is referred to as x86.
#
To use the Storport Miniport driver for the HBA driver in an environment where
SP1 or later has not been installed, QFE update program QFE 838894 or later
provided by Microsoft is required.
(2) Microsoft MPIO Drivers
Table 3-2: Versions of the Microsoft MPIO Driver Bundled with HDLM lists the
versions of the Microsoft MPIO driver bundled with HDLM.
Table 3-2: Versions of the Microsoft MPIO Driver Bundled with HDLM
Note:
For Windows Server 2008, use the MPIO driver bundled with the OS.
(3) Web Browsers Supported by HDLM
HDLM supports Internet Explorer 5.0 or later.
3.1.2 Storage systems Supported by HDLM
This subsection describes the storage systems supported by HDLM and related
programs when using intermediate volumes managed by Hitachi RapidXchange.
(1) Supported Storage systems
The storage systems supported by HDLM are described in Table 3-3: Supported
Storage systems. The supported storage systems require a dual controller
configuration. If you use the system in a HUB environment, you must set a unique loop
Windows Server 2008 R2(x64) No service pack
SP1
Windows Server 2008(x86) No service pack
SP2
Driver Description File version
mpdev.sys
Multipath Scsi Device Filter 1.23
mpio.sys
Multipath Support Bus-Driver 1.23
mpspfltr.sys
Multipath Scsi Filter 1.23
OS Service pack