HP Hitachi Dynamic Link Manager Software - Manual (Page 64)

2. HDLM Functions
40
#1
When you turn the intermittent error monitoring function off, information about
paths not subject to automatic failback will be reset. If you do not want to reset
the information about paths not subject to automatic failback when you turn the
intermittent error monitoring function off, change the target paths to
Offline(C)
.
#2
The number of errors and the time passed since error monitoring had started are
both reset to
0
, and then monitoring restarts from the time the setting change is
made in accordance with the changed monitoring conditions.
#3
When the settings for a function other than intermittent error monitoring have
been changed or even when the settings have not been changed, if the Apply or
OK button is clicked, the number of error occurrences and the time since
monitoring had started are both reset. To leave the settings unchanged, close the
Options window by clicking the Cancel button. If you want to change the settings
for a function other than intermittent error monitoring but do not want to reset the
intermittent error monitoring status, use an HDLM command instead of the
HDLM GUI.
#4
The number of errors and the time passed since error monitoring had started are
both reset to
0
, and then monitoring restarts from the time the HDLM manager
starts.
Restarting the HDLM manager
Reset #4 Inherited
Restarting the host Reset Reset
User operation Number of errors
and time passed
since error
monitoring
started
Information
about paths not
subject to
automatic
failback