HP Hitachi Dynamic Link Manager Software - Manual (Page 200)

4. HDLM Operation
176
port offline, execute the
dlnkmgr
command's
offline
operation with the
-hba
parameter specified. The following shows an example of executing this
command:
>dlnkmgr offline -hba 1.1
KAPL01055-I All the paths which pass the specified HBA port
will be changed to the Offline(C) status. Is this OK? [y/n]:y
KAPL01056-I If you are sure that there would be no problem
when all the paths which pass the specified HBA are placed
in the Offline(C) status, enter y. Otherwise, enter n. [y/
n]:y
KAPL01061-I 3 path(s) were successfully placed Offline(C); 0
path(s) were not. Operation name = offline
>
3. Check to see if the statuses of all the applicable paths have changed.
The following example shows how to execute the command:
>dlnkmgr view -path
4.3.4 Viewing LU Information
This section explains how to display LU information by using an HDLM command.
To display LU information, execute the
dlnkmgr
command's
view
operation with the
-lu
parameter specified. The following shows an example in which the command is
executed:
>dlnkmgr view -lu
Product : 9500V
SerialNumber : 3679
LUs : 3
iLU HDevName PathID Status
0110 G 000002 Online
000008 Online
0111 F 000001 Online
000007 Online
0112 E 000000 Online
000006 Online
Product : 9970/9980
SerialNumber : 15001
LUs : 3
iLU HDevName PathID Status
0580 J 000005 Online