HP Hitachi Dynamic Link Manager Software - Manual (Page 247)

6. Command Reference
223
to the Online status. Is this OK? [y/n]: y
KAPL01061-I 1 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
-s
Executes the command without displaying the message asking for confirmation
of command execution from the user. Specify this parameter if you want to skip
the response to the confirmation message: for example, when you want to execute
the command in a shell script or batch file.
Example
The following example shows how to place a path, whose AutoPATH_ID is
000002
, online without asking for confirmation of command execution
from the user:
>dlnkmgr online -pathid 2 -s
KAPL01061-I 1 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
>
(2) To Display the Format of the Online Operation
-help
Displays the format of the
online
operation.
Example
The following example shows how to display the format of the
online
operation:
>dlnkmgr online -help
online:
Format
dlnkmgr online [-path] [-s]
dlnkmgr online [-path] -hba HBAPortNumber.BusNumber
[-s]
dlnkmgr online [-path] -cha -pathid AutoPATH_ID [-s]
dlnkmgr online [-path] [-pathid AutoPATH_ID] [-s]
dlnkmgr online [-path] [-hbaportwwn HBA_Port_WWN
[-tid Target_ID -hlun Host_LUN]]
[-s]
Valid value
AutoPATH_ID { 000000 - 999999 }(Decimal)
Host_LUN { 0000 - FFFF }(Hexadecimal)
KAPL01001-I The HDLM command completed normally.
Operation name = online, completion time = yyyy/mm/dd
hh:mm:ss