HP Hitachi Dynamic Link Manager Software User Manual
Page 119
3. Creating an HDLM Environment
95
If you have specified
n
for the
restart
key in the installation-information
settings file, go to step 11.
If you have specified
y
for the
restart
key in the installation-information
settings file, go to step 16.
4.
The program checks the MPIO driver version, and then installs the MPIO driver.
If a message appears, asking you whether you want to install the MPIO driver,
make sure that no multi-path management software other than HDLM is installed.
• If multi-path management software other than HDLM is installed, click the
Cancel button to cancel the installation, uninstall the multi-path
management software, and then install HDLM.
• If no multi-path management software other than HDLM is installed, click
the Next button to continue the installation.
5.
Follow the instructions shown in the messages that appear in the window.
• If a license key file was saved in step 2, specify that license key file.
• If a license key file is not being used, specify the license key directly.
6.
Specify the installation folder by following the instructions shown in the
messages that appear in the window.
The utility for registering HDLM persistent reservation keys (
dlmprsvkey
) will
be automatically executed. However, creation of the PRSV key might be
unsuccessful if, for example, an NIC does not exist. If the PRSV key is created
with time information only, or if key creation fails, a dialog box will prompt you
to enter a PRSV key.
If this dialog box appears, go to step 7; otherwise, go to step 9.
7.
Enter the PRSV key by following the instructions shown in the dialog box.
The PRSV key is required for the HDLM functions to properly operate. Also, the
value of the PRSV key must be unique for each host.
8.
If the KAPL09128-W message appears, you will need to re-enter a correct PRSV
key.
If a message does not appear, go to the next step.
9.
Select an HDLM management-target device only when the OS is one of the
following:
• Windows Server 2003 (x86) SP1 or later
• Windows Server 2003 (IPF) SP1 or later
• Windows Server 2003 (x64)
#