HP Hitachi Dynamic Link Manager Software - Manual (Page 202)

4. HDLM Operation
178
4.3.6 Viewing and Setting Up the Operating Environment
This section explains how to display and set up the HDLM operating environment.
(1) Viewing the Operating Environment
To display the operating environment, execute the
dlnkmgr
command's
view
operation with the
-sys
and
-sfunc
parameters specified.
The following shows an example in which the command is executed:
>dlnkmgr view -sys -sfunc
HDLM Version : x.x.x-xx
Service Pack Version :
Load Balance : on(extended lio)
Support Cluster : off
Elog Level : 3
Elog File Size(KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(1)
Remove LU : on
Intermittent Error Monitor : off
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
>
To display the operating environment of the audit log, execute the HDLM command's
view
operation with the
-sys
and
-audlog
parameters specified.
>dlnkmgr view -sys -audlog
Audit Log : off
Audit Log Category : -
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
>
For details on the displayed items and their descriptions, see 6.7 view (Displays
Information).
(2) Setting Up the Operating Environment
To set up the HDLM operating environment, execute the
dlnkmgr
command's
set
operation. This operation allows you to set up the following functions:
• Load balancing