HP Hitachi Dynamic Link Manager Software - Manual (Page 324)

7. Utility Reference
300
>dlmchkpath -singleconnect
KAPL12402-W iLU(0100) is in a multi-path configuration.
PathID = 0,3
KAPL12402-W iLU(0101) is in a multi-path configuration.
PathID = 1,4
KAPL12402-W iLU(0102) is in a multi-path configuration.
PathID = 5,2
In the following example, the
view
operation is performed when the utility
determines that the system is in a multi-path configuration. For details about
the
view
operation, see 6.7 view (Displays Information).
>dlnkmgr view -path -c
Paths:000006 OnlinePaths:000006
PathStatus IO-Count IO-Errors
Online 152579 30
PathID DskName iLU CP
Status Type
000000 HITACHI .DF600F .5455 0100 0C
Online Own
000001 HITACHI .DF600F .5455 0101 0C
Online Own
000002 HITACHI .DF600F .5455 0102 0C
Online Non
000003 HITACHI .DF600F .5455 0100 1C
Online Non
000004 HITACHI .DF600F .5455 0101 1C
Online Non
000005 HITACHI .DF600F .5455 0102 1C
Online Own
KAPL01001-I The HDLM command completed normally.
Operation name = view, completion time = yyyy/mm/dd
hh:mm:ss
-h
Displays the format of the
dlmchkpath
utility.
If you do not specify any parameters, a warning message will appear.