HP Hitachi Dynamic Link Manager Software - Manual (Page 125)

3. Creating an HDLM Environment
101
8. follow the procedure below:
• The KAPL09127-W message will appear if the MPIO driver has already
been installed and the version does not match the version of the MPIO driver
about to be installed.
- Click the Next button to install the MPIO driver.
- Click the Cancel button to cancel the installation.
• If no message appears, go to the next step.
9. Specify a license key file or enter a license key by following the instructions
shown in the messages that appear in the window.
• If a license key file was saved in step 5, specify that license key file.
• If a license key file is not being used, specify the license key directly.
10. Specify the installation folder by following the instructions shown in the
messages that appear in the window.
The utility for registering HDLM persistent reservation keys (
dlmprsvkey
) will
be automatically executed. However, creation of the PRSV key might be
unsuccessful if, for example, an NIC does not exist. If the PRSV key is created
with time information only, or if key creation fails, a dialog box will prompt you
to enter the PRSV key.
If this dialog box appears, go to step 10; otherwise, go to step 12.
11. Enter the PRSV key by following the instructions shown in the dialog box.
The PRSV key is required for the HDLM functions to properly operate. Also, the
value of the PRSV key must be unique for each host.
12. If the KAPL09128-W message appears, you will need to re-enter a correct PRSV
key.
If a message does not appear, go to the next step.
13. Select an HDLM management-target device only when the OS is one of the
following:
• Windows Server 2003 (x86) SP1 or later
• Windows Server 2003 (IPF) SP1 or later
• Windows Server 2003 (x64)
#
#
This OS cannot be used with the EMC DMX series.
The Hitachi storage subsystems and HP StorageWorks XP Series option is