HP Hitachi Dynamic Link Manager Software - Manual (Page 289)

6. Command Reference
265
Status
Status of the path
•
Online
: Online
•
Offline(C)
: Placed offline using the Path Management window of the
HDLM GUI or by a command
•
Offline(E)
: Offline due to an error
•
Online(E)
: Failure has occurred (If none of the paths accessing one LU have
an
Online
status, one of those paths is changed to the
Online(E)
status.)
•
Online(P)
:
offline
operation on an
Online
path is waiting to execute #2
•
Offline(P)
:
offline
operation on an
Offline(E)
path is waiting to
execute #2
•
Online(EP)
:
offline
operation on an
Online(E)
path is waiting to
execute #2
Paths that are
Offline(E)
or
Online(E)
require corrective action. The
appropriate action can be determined by referring to 5.3 What To Do for a Path
Error.
Type
#1
Type
• For the Thunder 9500V series, Lightning 9900 series, Lightning 9900V
series, Hitachi USP, Hitachi AMS2000/AMS/WMS/SMS series, Universal
Storage Platform V/VM, and Virtual Storage Platform:
Attribute of the path
Own
: Owner path
Non
: Non-owner path
When connecting to the Lightning 9900 series, Lightning 9900V series,
Hitachi USP, Universal Storage Platform V/VM, Virtual Storage Platform,
Hitachi AMS2000 series, or Hitachi SMS, all paths are owner paths.
• For the EMC DMX series, EMC CX series, and HP EVA series:
A hyphen (
-
) is displayed.
IO-Count
#1 - Total I/O count for the path, indicated by a decimal number. The maximum value
that can be displayed is 2
32 - 1 (4294967295). If the total I/O count reaches the
maximum value, it will re-start from 0.
To reset the
IO-Count
value to 0, execute the
dlnkmgr
command's
clear
operation. Executing the
clear
operation also resets the number of I/O errors
(
IO-Errors
) to 0. For details about the
clear
operation, see 6.2 clear (Returns
the Path Statistics to the Initial Value).
IO-Errors
#1
- Total I/O error count for the path, indicated by a decimal number. The maximum
value that can be displayed is 2
32 - 1 (4294967295). If the total I/O error count
reaches the maximum value, it will re-start from 0.
To reset the
IO-Errors
value to 0, execute the
dlnkmgr
command's
clear
operation. Executing the
clear
operation also clears the number of I/O
operations (
IO-Count
) to 0.
For details about the
clear
operation, see 6.2 clear (Returns the Path Statistics
to the Initial Value).
Displayed Item Description
No
summary
displayed
Summary
displayed