HP Hitachi Dynamic Link Manager Software - Manual (Page 145)

3. Creating an HDLM Environment
121
• If you are not performing an unattended installation, insert the DVD into the
drive and run the installation program
setup.exe
.
The program checks whether HDLM has already been installed. If the
KAPL09173-W message appears, perform the procedure shown in
3.5.5 Upgrade Installation or Re-installation of HDLM. If a message does
not appear, go to the next step.
• If you are performing an unattended installation, execute the
installhdlm
utility.
From the command prompt, execute the following command:
drive-containing-the-inserted-installation-DVD
:\HDLM_Windows\DLMTo
ols\installhdlm -f
installation-information-settings-file
This command checks whether HDLM has already been installed. If the
KAPL09183-I message appears, a re-installation will be performed.
If you specified
n
for the
restart
key in the installation-information
settings file, go to step 8.
If you specified
y
for the
restart
key in the installation-information
settings file, go to step 18.
4. Specify a license key file or enter the license key by following the instructions
shown in the messages that appear in the window.
• If a license key file was saved in step 2, specify that license key file.
• If a license key file is not being used, specify the license key directly.
5. Specify the installation folder by following the instructions shown in the
messages that appear in the window.
The utility for registering HDLM persistent reservation keys (
dlmprsvkey
) will
be automatically executed to create a PRSV key. However, creation of the PRSV
key might be unsuccessful if, for example, an NIC does not exist. If the PRSV key
is created with time information only, or if key creation fails, a dialog box will
prompt you to enter the PRSV key.
If this dialog box appears, go to step 6; otherwise, go to step 7.
6. Enter the PRSV key by following the instructions shown in the dialog box.
The PRSV key is required for the HDLM functions to properly operate. Also, the
value of the PRSV key must be unique for each host.
If the KAPL09128-W message appears, you will need to re-enter the correct
PRSV key.
7. Follow the instructions shown in the messages that appear in the window.