HP Hitachi Dynamic Link Manager Software - Manual (Page 262)

6. Command Reference
238
KAPL01071-I A permanent license was installed.
>
Example 2
The following example shows how to update the license key when the
license key file does not exist:
>dlnkmgr set -lic
KAPL01049-I Would you like to execute the operation?
Operation name = set [y/n]: y
KAPL01083-I There is no license key file. File name
=
Windows-installation-destination-drive-name
\hdlm_license
KAPL01068-I Enter a license key:
*************
KAPL01071-I A permanent license was installed.
>
-rmlu { on [ -force ] | off }
Enables or disables the LU dynamic deletion function.
on
: Enabled
off
: Disabled
The default is
off
.
The following sub-parameter can be used to specify how the LU dynamic deletion
function operates.
-force
The LU is removed from under HDLM-management when all the paths to
the LU are disconnected, even when an
Offline(C)
path is included in the
paths connected to the LU.
For details on the LU dynamic deletion function, see 4.7.2 Deleting an LU
Dynamically.
Table 6-7: Values for the LU Dynamic Deletion Function shows the values of the
LU dynamic deletion function.
Table 6-7: Values for the LU Dynamic Deletion Function
Value Description
off
The LU will not be removed from under HDLM-management, even if an error occurs on all
the paths to the LU, all the paths to the LU are disconnected, or the LU is deleted. The path
statuses are
Offline(E)
and
Online(E)
. This operation is the same as the in HDLM 05-01
or earlier. The
off
option is recommended when you want to use the same function as you
used before in HDLM 05-01 or earlier, without using the LU dynamic deletion function.