HP Hitachi Dynamic Link Manager Software - Manual (Page 275)

6. Command Reference
251
>dlnkmgr view -sys -audlog
Audit Log : off
Audit Log Category : -
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
>
(2) Parameters Used When Displaying HDLM Management-target Device
Information
-stinfo
Use this parameter to display information about an HDLM management-target
device (except the Thunder 9500V series, Lightning 9900 series, Lightning
9900V series, Hitachi USP, Hitachi AMS2000/AMS/WMS/SMS series,
Universal Storage Platform V/VM, and Virtual Storage Platform) that was
specified when HDLM was installed.
Table 6-11: HDLM Management-target Device Information describes the
displayed items.
Table 6-11: HDLM Management-target Device Information
#1
The EMC DMX series cannot be managed.
Item Description
HDLM management-target
device
Name of the HDLM management-target device (except the Thunder 9500V
series, Lightning 9900 series, Lightning 9900V series, Hitachi USP, Hitachi
AMS2000/AMS/WMS/SMS series, Universal Storage Platform V/VM, and
Virtual Storage Platform)
Setting Status
Setting status of the HDLM management-target device (except the Thunder
9500V series, Lightning 9900 series, Lightning 9900V series, Hitachi USP,
Hitachi AMS2000/AMS/WMS/SMS series, Universal Storage Platform V/VM,
and Virtual Storage Platform).
on
: Enabled
off
: Disabled
The HDLM management-target device (except the Thunder 9500V series,
Lightning 9900 series, Lightning 9900V series, Hitachi USP, Hitachi AMS2000/
AMS/WMS/SMS series, Universal Storage Platform V/VM, and Virtual Storage
Platform) can be set when the OS is one of the following. Otherwise, this item
always displays
off
.
• Windows Server 2003 (x86) SP1 or later
• Windows Server 2003 (IPF) SP1 or later
• Windows Server 2003 (x64)
#1
• Windows Server 2008 #2
If the OS is Windows Server 2008, this item always displays
on
.