HP Hitachi Dynamic Link Manager Software - Manual (Page 244)

6. Command Reference
220
6.5 online (Places Paths Online)
The
dlnkmgr
command's
online
operation places offline paths online. To specify the
paths to be placed online, specify an HBA port, CHA port, single path, or HBA port
WWN.
6.5.1 Format
(1) To Place Paths Online
dlnkmgr online
[-path]
[-hba
host-port-number.bus-number
|-cha -pathid
AutoPATH_ID
|-pathid
AutoPATH_ID
|-hbaportwwn
HBA-port-WWN
[-tid
target-ID
-hlun
host-LU-number
]]
[-s]
(2) To Display the Format of the Online Operation
dlnkmgr online -help
6.5.2 Parameters
(1) To Place Paths Online
-path
Indicates that the target of the operation is a path managed by HDLM.
This parameter is optional because the
online
is always used for paths, so it is
assumed.
Specify the paths to be taken online by using the
-hba
,
-cha
,
-pathid
, or
-hbaportwwn
parameter. If you do not specify any of these parameters, the
command will place all the offline paths online. If there is a path that cannot be
placed online, a message asks whether you would like to continue processing. To
ignore the offline path that cannot be placed online and to continue processing,
enter
y
. To stop the processing, enter
n
.
-hba
host-port-number.bus-number
Use this parameter to place online, at one time, all the paths that pass through a
specific HBA port. The command will place online all the paths connected to the
HBA port that has the specified host port number and bus number.