HP Hitachi Dynamic Link Manager Software - Manual (Page 361)

8. Messages
337
Action
Use the
view
operation of the HDLM command (
dlnkmgr view -path
-hbaportwwn
) to check the target HBA port WWN. After that, specify the
appropriate HBA port WWN, and then retry.
KAPL01102-I
All the paths which pass the specified
aa...aa
port will be changed
to the Offline(C) status. Is this OK? [y/n]:
Details
Multiple paths will be collectively placed Offline(C) because the
-hbaportwwn
parameter was specified. To collectively place multiple paths Offline(C), enter
y
.
To not collectively place them Offline(C), enter
n
.
aa...aa: HBA
Action
If you want to execute the offline processing for the paths which pass the specified
target, enter
y
. If you want to terminate the processing, enter
n
.
KAPL01103-I
If you are sure that there would be no problem when all the paths
which pass the specified
aa...aa
port are placed in the Offline(C)
status, enter y. Otherwise, enter n. [y/n]:
Details
This message re-asks the user whether to place all the paths Offline(C). To place
all the paths Offline(C), enter
y
. To not place them Offline(C), enter
n
.
aa...aa: HBA
Action
If you want to execute the offline processing for the paths which pass the specified
target, enter
y
. If you want to terminate the processing, enter
n
.
KAPL01104-I
All the paths which pass the specified
aa...aa
port will be changed
to the Online status. Is this OK? [y/n]:
Details
Multiple paths will be collectively placed Online because the
-hbaportwwn
parameter was specified. To collectively place multiple paths Online, enter
y
. To
not collectively place them Online, enter
n
.
aa...aa: HBA
Action