HP Hitachi Dynamic Link Manager Software - Manual (Page 201)

4. HDLM Operation
177
000011 Online
0585 I 000004 Online
000010 Online
058A H 000003 Online
000009 Online
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
>
For details on the displayed items and their descriptions, see 6.7 view (Displays
Information).
4.3.5 Initializing Statistical Information for Paths
This section explains how to initialize statistical information (I/O counts and I/O
errors) for all the paths managed by HDLM.
This procedure is useful when you want to check the number of I/O operations and I/
O errors that have occurred since the last time the I/O counts and I/O errors were
initialized to
0
.
To initialize statistical information for paths:
1.
Check the current status of the path.
The following shows how to execute the command:
>dlnkmgr view -path
2. To initialize statistical information for all the paths managed by HDLM, execute
the
dlnkmgr
command's
clear
operation with the
-pdst
parameter specified.
The following shows an example in which the command is executed:
>dlnkmgr clear -pdst
KAPL01049-I Would you like to execute the operation?
Operation name = clear [y/n]:y
KAPL01001-I The HDLM command completed normally. Operation
name = clear, completion time = yyyy/mm/dd hh:mm:ss
>
3. Check to see whether the statistical information for all the paths has been
initialized.
The following shows how to execute the command:
>dlnkmgr view -path