HP Hitachi Dynamic Link Manager Software User Manual
Page 331
7. Utility Reference
307
#2
If a value is not of an allowable type, an error will occur.
#3
The value to be specified does not have to be enclosed within double quotation
marks (
"
), even if the value includes space characters.
#4
When you perform a new installation of HDLM, or when you perform an upgrade
installation and the license is expired, you must prepare the license key file.
#5
In Windows Server 2003 (excluding the x86 edition) or Windows Server 2008
(excluding the x86 edition), the installer uses the following folder:
Windows-installation-drive
:\Program Files
(x86)\HITACHI\DynamicLinkManager
#6
• You cannot specify
y
for the
HDLM_core
key to perform an upgrade
installation or re-installation of HDLM on a host on which all the HDLM
components have already been installed. If you want to do this, first uninstall
HDLM, and then perform a new installation.
• If you want to install all the HDLM components on a host on which only the
HDLM Core components have been installed, specify
n
for the
HDLM_core
key.
[ENVIRONMENT_SETTINGS]
section
This section defines HDLM operational and function information. HDLM operational
and function information is optional, however, if omitted, the installer will use the
following values:
• For a new installation, the installer uses the default values of the keys that are
listed in the following Table 7-4: Keys That Can Be Defined in the
[ENVIRONMENT_SETTINGS] Section.
• For an upgrade installation or re-installation, the installer uses the old HDLM
setting values.
Note that do no modify any definitions of items that are not listed in Table 7-4: Keys
That Can Be Defined in the [ENVIRONMENT_SETTINGS] Section.
Table 7-4: Keys That Can Be Defined in the [ENVIRONMENT_SETTINGS] Section
lists and explains the keys that can be defined in the
[ENVIRONMENT_SETTINGS]
section.