HP Hitachi Dynamic Link Manager Software - Manual (Page 290)

6. Command Reference
266
Legend:
- : Not displayed
#1
The path information is displayed only when a value is specified for the
-path
-item
parameter.
#2
In a cluster configuration, an
offline
operation requested during reserve
processing is put into the waiting-to-execute state, and does not execute until the
reserve processing finishes.
DNum
#1 - When Dev indicates an entire LU, 0 is displayed.
HDevName
#1
#3
- Host device name.
A drive letter is displayed. If no drive letter has been assigned, a hyphen (
-
) is
displayed.
The drive letter is displayed in the
HDevName
field even if the value of the
DNum
field is
0
. Note, however, that the displayed drive letter is the drive letter for one
of the Devs included in the LU.
IEP
#1 - Information about the intermittent error.
This item is displayed only when you specify
-iem
with the
-path
parameter.
One of the following values is displayed for each path:
•
-
Indicates that intermittent error monitoring is disabled or the monitoring time
for an intermittent error is out of range (the path status is
Online(E)
or
Offline(E)
).
• A value of at least 0
Indicates the number of errors that occurred during intermittent error
monitoring (the path status is
Online(E)
,
Offline(E)
, or
Online
).
•
*
Indicates that an intermittent error occurred (automatic failbacks do not check the
path) (the path status is
Online
,
Online(E)
, or
Offline(C)
).
HBAPortWW
N
#1
- A 16-digit hexadecimal number indicating the WWN information for an HBA
connected to the storage system.
This item is displayed only when you specify
-hbaportwwn
together with the
-path
parameter.
Note that a hyphen (
-
) is displayed in the following cases:
• When using the EMC DMX, EMC CX, or HP EVA series
• When using iSCSI interfaces
Displayed Item Description
No
summary
displayed
Summary
displayed