HP Hitachi Dynamic Link Manager Software - Manual (Page 310)

7. Utility Reference
286
7.2 The DLMgetras Utility for Collecting HDLM Error Information
This utility collects information that is needed to analyze HDLM errors that have
occurred: information such as error logs, integrated trace files, trace files, definition
files, and OS information. The collected information is archived in a file and saved to
a folder of your choosing.
Whenever the host is restarted, some of the information that is collected by the
DLMgetras
utility will be cleared. As a result, whenever an error occurs, immediately
execute this utility to avoid losing any valuable information.
This utility is in the following locations:
HDLM-installation-folder
\bin
and
drive-where-the-installation-DVD-has-been-inserted
:\HDLM_Windows\DLMTools
#
#
Use this utility only in an environment where the version of the installed HDLM
and the version on the DVD are the same.
7.2.1 Format
(1) When Executing the DLMgetras Utility from the Command Prompt
DLMgetras {[
folder-to-which-collected-information-is-output
] [-eventlogtime
yyyy
/
mm
/
dd
| -eventlogsize {all |
maximum-file-length
}] | -h}
You can also use lower-case characters as follows:
dlmgetras {[
folder-to-which-collected-information-is-output
] [-eventlogtime
yyyy
/
mm
/
dd
| -eventlogsize {all |
maximum-file-length
}] | -h}
(2) When Executing the DLMgetras Utility from the Windows Start Menu
From the Windows Start menu, choose Programs, Dynamic Link Manager, and
then DLMgetras.
You can change the Windows-installation-destination-drive-name
\hdlmtemp
portion
by changing the target in the DLMgetras properties.
7.2.2 Parameters
You can specify parameters for the
DLMgetras
utility only from the command
prompt.
folder-to-which-collected-information-is-output
Specify the output folder for the information that is to be collected by the