HP Hitachi Dynamic Link Manager Software - Manual (Page 303)

6. Command Reference
279
PathName
#1 - The path name. When you modify the system configuration or replace
a hardware item, you should check the path names to identify the path
that will be affected by the change.
Path name
consists of the following
four elements, separated by periods:
• Host port number (hexadecimal number)
• Bus number (hexadecimal number)
• Target ID (hexadecimal number)
• Host LU number (hexadecimal number)
For details about each element of the path name and its representation
in Windows, see Table 6-14: Elements of a Path Name
ChaPort
#1 - • For the Thunder 9500V series, Lightning 9900 series, Lightning
9900V series, Hitachi USP, Hitachi AMS2000/AMS/WMS/SMS
series, Universal Storage Platform V/VM, and Virtual Storage
Platform:
Port number of the channel adapter, which identifies the CHA port
that is mounted on the storage system.
You can identify an actual CHA port by referencing this number
from the storage system management program.
• For the EMC DMX series, EMC CX series, and HP EVA series:
A hyphen (
-
) is displayed.
CLPR
#1 - The number of the CLPR to which the CHA port belongs, indicated by
a number from 0 to 31. Note that a hyphen (
-
) is displayed if the
following items are subject to display:
• CHA ports in the storage system that do not support the cache
logical partition function
• Paths connected to the Snapshot Image of the Copy-on-write
Snapshot of the Hitachi AMS2000/AMS/WMS/SMS series.
Displayed item Description
No summary
displayed
Summary
displayed