HP Hitachi Dynamic Link Manager Software - Manual (Page 263)

6. Command Reference
239
-audlog {on [-audlv
audit-log-data-collection-level
] [-category
[[ss][a][ca]|all]]|off}
Specifies whether to collect audit log data.
on
: Audit log data is collected.
off
: Audit log data is not collected.
-audlv
audit-log-data-collection-level
Specifies the severity level that determines the selection of audit log data to
be collected. Table 6-8: Values Indicating Audit Log Data Collection
Levels lists the values that indicate audit log data collection levels. The
default is
6
.
Table 6-8: Values Indicating Audit Log Data Collection Levels
-category [[ss][a][ca]|all]
Specifies the categories of audit log data to be collected. Table 6-9: Values
on
The LU is removed from HDLM-management when all the paths to the LU are
disconnected. However, if an
Offline(C)
path is among the disconnected paths, the LU
will not be deleted from HDLM-management.
The deleted LU is restored after it is recovered from the physical failure and the disk is
re-scanned.
on -force
The LU is removed from HDLM-management when all the paths to the LU are
disconnected, even when an
Offline(C)
path is included.
The removed LU is restored after it is recovered from the physical failure and the disk is
re-scanned.
Value (severity) Explanation
0
Error-level audit log data is collected.
1
2
3
4
Error-level and Warning-level audit log data is collected.
5
6
Error-level, Warning-level, and Information-level audit log data is collected.
7
Value Description