HP Hitachi Dynamic Link Manager Software - Manual (Page 334)

7. Utility Reference
310
Legend:
Optional:
• For a new installation:
If no key or setting value is specified, the installer uses the default
values.
• For an upgrade installation or re-installation:
If no key or setting value is specified, the installer uses the old HDLM
setting values.
#1
Keys that are not specified for an upgrade installation or re-installation inherit the
current key settings.
#2
intermittent_error
_monitor_number
#5
Specify how many times an error needs to
occur to cause HDLM to assume an
intermittent error.
You can specify a value from
1
to
99
. The
default is
3
.
Optional Optional 2
remove_lu
Specify whether to enable the LU dynamic
removal function by setting either of the
following values:
on
: Enable the LU dynamic removal
function.
off
: Disable the LU dynamic removal
function (default).
Optional Optional 3
remove_lu_force
Using either of the following values, specify
whether to remove an LU from the HDLM
management target list when all paths to the
LU are disconnected, even when there are
Offline(C) paths:
#2
on
: Remove the LU.
off
: Do not remove the LU (default).
Optional Optional 3
Key name #1 Description #2 Necessity of
definition
Maximu
m
charact
er
length #3
New
installati
on
Upgrad
e
installati
on or
Re-insta
llation