HP Hitachi Dynamic Link Manager Software - Manual (Page 273)

6. Command Reference
249
#
When the HDLM manager starts, HDLM cluster servers are automatically
recognized.
Examples
Example 1
The following example shows how to display information about the HDLM
function settings:
>dlnkmgr view -sys -sfunc
HDLM Version : x.x.x-xx
Service Pack Version :
Load Balance : on(extended lio)
Support Cluster : off
Elog Level : 3
Elog File Size(KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(1)
Remove LU : on
Intermittent Error Monitor : off
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
>
Example 2
The following example shows how to display information about the HDLM
manager:
Audit Log
Category
The categories of audit log data to be output are displayed. When
more than one category is displayed, commas (
,
) are used as
separators.
ss
:
StartStop
a
:
Authentication
ca
:
ConfigurationAccess
If all the above categories are specified,
all
is displayed.
If the collection of audit log data is disabled, a hyphen (
-
) is
displayed.
Parameter and
program
information to be
displayed
Item Description