HP Hitachi Dynamic Link Manager Software User Manual

Page 120

3. Creating an HDLM Environment

This OS cannot be used with the EMC DMX series.

The Hitachi storage subsystems and HP StorageWorks XP Series option is

always selected. To select an EMC DMX series or EMC CX series LU as the

HDLM management-target device, select EMC Symmetrix DMX Series,

CLARiiON CX Series. To select an HP EVA series LU as the HDLM

management-target device, select HP StorageWorks EVA Series.

10. Follow the instructions shown in the messages that appear in the window.

• If a dialog box with the following text appears during installation, and the

Storport Miniport driver is being used as the HBA driver, stop the HDLM

installation. After that, install QFE838894 or a later version of the Microsoft

Storport driver, or install Windows Server 2003 SP1 or later.
Notes on using a Storport Miniport driver
Read these notes before using a Storport Miniport driver as an HBA

driver.
The file version of the Storport.sys of this system (Microsoft(R) Storport

driver) is n.n.nnnn.n.
When using a Storport Miniport driver as an HBA driver:
Please update the Storport Miniport driver to a Storport.sys with a file

version n.n.nnnn.n or later.

• The PRSV key will be registered before the installation finishes. If the

KAPL09131-W message appears, follow the procedure described in step 12.

• Although a message prompting you to restart the host appears after the

installation has finished, a restart is not necessary.

• In the last installation window, the following message might be output:

When you manage a host by using Global Link Manager and
Windows firewall is enabled on that host, execute the
firewall_setup command to allow a firewall exception.

If Global Link Manager will not be used to manage HDLM, you do not need

to take any action.
To manage HDLM with Global Link Manager, register Firewall exceptions.

For details, see 3.5.8 Firewall Settings for Managing HDLM by Using

Global Link Manager.

11. Check the results of the installation.

If you have performed an unattended installation, check the installation results

from the command prompt.