HP Hitachi Dynamic Link Manager Software - Manual (Page 316)

7. Utility Reference
292
which collected information is output, or if the DLMgetras utility is executed
from the Windows Start menu, the default for the folder to which collected
information is output is
Windows-installation-destination-drive\hdlmtemp\hdlmgetras_nn, where nn is a
number from 00 to 99.
#2
The underlined part indicates the folder specified during installation
#3
In Windows Server 2008, files residing in
%SystemRoot%\inf\
are also
acquired.
#4
You can obtain these files only in Windows Server 2008.
#5
The value N depends on the setting in the
dlmwebagent.properties
file. The
default value is
2
.
#6
M.N indicates the version of VxVM, or of Veritas Storage Foundation for
Windows including the VxVM. For example, 5.0 indicates Veritas Storage
Foundation for Windows 5.0.
#7
For Windows Server 2003 (excluding the x86 edition) or Windows Server 2008
(excluding the x86 edition),
Program Files
is
Program Files (x86)
.
#8
File names are created by using the value in the Hitachi Network Objectplaza
Trace Library utility's
Output (directory and prefix)
, adding
2
onto the
end, and then adding a file number onto the end of that. The default file names
range from
hntr21.log
to
hntr216.log
. Note that
2
is part of the integrated
trace file name and does not represent part of the file number.
#9
You can obtain
dlm_iscsims.txt
only when the iSCSI software is installed.
#10
You can obtain these files only in Windows Server 2003.
#11
You can obtain all files under
hbsainfo
only when a Hitachi Command Suite