HP Hitachi Dynamic Link Manager Software - Manual (Page 277)

6. Command Reference
253
the host device unless a drive letter has been assigned. The host-device-name
string is case sensitive. If the command ends with the KAPL01064-W or
KAPL01013-E message, follow the recommended action in the message.
-stname
Use this parameter for the Thunder 9500V series, Lightning 9900 series,
Lightning 9900V series, Hitachi USP, Hitachi AMS2000/AMS/WMS/SMS
series, Universal Storage Platform V/VM, or Virtual Storage Platform to
display the model ID of the storage system in the product ID element of the
DskName
field. When this parameter is omitted, the command displays the
product ID or emulation type of the storage system instead.
For details about the information displayed for product IDs, see
Table 6-15: Product ID Displayed by the View -path Operation.
-iem
Use this parameter to add
IEP
to path information and display information
about intermittent errors.
-srt {pn|lu|cp}
Use this parameter to sort the path information in ascending order, according
to the specified sorting keys.
The sorting keys are as follows: the first sorting key is the name of the
storage system (
DskName
), the second sorting key is the value specified by
the
-srt
parameter, and the third sorting key is AutoPATH_ID.
The parameter values available to specify the second sorting key are:
•
pn
: Path name
•
lu
: LU number of the storage system
•
cp
: Port number of the channel adapter
When the
-srt
parameter is omitted, the path information is listed in
ascending order of AutoPATH_IDs.
-exlu
• When an HDLM management-target device is the EMC DMX series,
EMC CX series, or HP EVA series:
If this parameter is specified, all 32 digits of the
iLU
are displayed
instead of truncating the
iLU
to 13 digits. If this parameter is not
specified, any characters after the 13
th
digit of the
iLU
of the EMC
DMX series, EMC CX series, and HP EVA series will not be displayed.
Ellipsis (
...
) will be displayed instead.