HP Hitachi Dynamic Link Manager Software - Manual (Page 131)

3. Creating an HDLM Environment
107
with time information only, or if key creation fails, a dialog box will prompt you
to enter the PRSV key.
If this dialog box appears, go to step 9; otherwise, go to step 11.
9. Enter the PRSV key by following the instructions shown in the dialog box.
The PRSV key is required for the HDLM functions to properly operate. Also, the
value of the PRSV key must be unique for each host.
10. If the KAPL09128-W message appears, you will need to re-enter the correct
PRSV key.
If a message does not appear, go to the next step.
11. Select an HDLM management-target device only when the OS is one of the
following:
• Windows Server 2003 (x86) SP1 or later
• Windows Server 2003 (IPF) SP1 or later
• Windows Server 2003 (x64) #
#
This OS cannot be used with the EMC DMX series.
The Hitachi storage subsystems and HP StorageWorks XP Series option is
always selected. To select an EMC DMX series or EMC CX series LU as the
HDLM management-target device, select EMC Symmetrix DMX Series,
CLARiX CX Series. To select an HP EVA series LU as the HDLM
management-target device, select HP StorageWorks EVA Series.
12. Follow the instructions shown in the messages that appear in the window.
• If a dialog box with the following text appears during installation, and the
Storport Miniport driver is being used as the HBA driver, stop the HDLM
installation. After that, install QFE838894 or a later version of the Microsoft
Storport driver, or install Windows Server 2003 SP1 or later.
Notes on using a Storport Miniport driver
Read these notes before using a Storport Miniport driver as an HBA
driver.
The file version of the Storport.sys of this system (Microsoft(R) Storport
driver) is n.n.nnnn.n.
When using a Storport Miniport driver as an HBA driver:
Please update the Storport Miniport driver to a Storport.sys with a file
version n.n.nnnn.n or later.