HP Hitachi Dynamic Link Manager Software - Manual (Page 136)

3. Creating an HDLM Environment
112
value of the PRSV key must be unique for each host.
12. If the KAPL09128-W message appears, you will need to re-enter the correct
PRSV key.
If a message does not appear, go to the next step.
13. The message Select Storage system to be managed. is displayed. Click the Next
button.
In a VCS environment, because an EMC DMX series or EMC CX series LU
cannot be set as an HDLM management-target device, do not select EMC
Symmetrix DMX Series, CLARiiON CX Series. Similarly, because an HP EVA
series LU cannot be set as an HDLM management-target device, do not select HP
StorageWorks EVA Series.
14. Follow the instructions shown in the messages that appear in the window.
• If a dialog box with the following text appears during installation, and the
Storport Miniport driver is being used as the HBA driver, stop the HDLM
installation. After that, install QFE838894 or a later version of the Microsoft
Storport driver, or install Windows Server 2003 SP1 or later.
Notes on using a Storport Miniport driver
Read these notes before using a Storport Miniport driver as an HBA
driver.
The file version of the Storport.sys of this system (Microsoft(R) Storport
driver) is n.n.nnnn.n.
When using a Storport Miniport driver as an HBA driver:
Please update the Storport Miniport driver to a Storport.sys with a file
version n.n.nnnn.n or later.
• The PRSV key will be registered before the installation finishes. If the
KAPL09131-W message appears, follow the procedure described in step 16.
• Although a message prompting you to restart the host appears after the
installation has finished, a restart is not necessary.
• In the last installation window, the following message might be output:
When you manage a host by using Global Link Manager and
Windows firewall is enabled on that host, execute the
firewall_setup command to allow a firewall exception.
If Global Link Manager will not be used to manage HDLM, you do not need
to take any action.
To manage HDLM with Global Link Manager, register Firewall exceptions.
For details, see 3.5.8 Firewall Settings for Managing HDLM by Using