HP Hitachi Dynamic Link Manager Software - Manual (Page 124)

3. Creating an HDLM Environment
100
key during the installation of HDLM.
installation-drive
:\hdlm_license
The license key file will be deleted after the installation finishes.
6. Perform the installation.
• If you are not performing an unattended installation, insert the DVD into the
drive and run the installation program
setup.exe
.
The program checks whether HDLM has already been installed. If HDLM
5.4 or earlier has been installed, the KAPL09129-E message will appear. If
this happens, carry out the procedure shown in 3.5.6 Migrating from HDLM
5.4 or Earlier to HDLM 5.5 or Later. If HDLM 5.5 or later has been
installed, the KAPL09173-W message will appear. If this happens, carry out
the procedure shown in 3.5.5 Upgrade Installation or Re-installation of
HDLM. If a message does not appear, go to step 7.
• If you are planning to perform an unattended installation, execute the
installhdlm
utility.
At the command prompt, execute the following command:
drive-to-which-the-installation-DVD-is-inserted
:\HDLM_Windows\DLMTo
ols\installhdlm -f
installation-information-settings-file
Specify
n
for the
restart
key in the installation-information settings file.
This command checks whether HDLM has already been installed. If HDLM
5.4 or earlier has been installed, the KAPL09129-E message will appear. If
this happens, carry out the procedure shown in 3.5.6 Migrating from HDLM
5.4 or Earlier to HDLM 5.5 or Later. If HDLM 5.5 or later has been
installed, the KAPL09183-E message will appear, and then the upgrade
installation or re-installation will be performed.
After the installation is complete, go to step 14.
7. The program checks the MPIO driver version, and then installs the MPIO driver.
If a message appears asking you whether you want to install the MPIO driver,
make sure that no multi-path management software other than HDLM is installed.
• If multi-path management software other than HDLM is installed, click the
Cancel button to cancel the installation, uninstall the multi-path
management software, and then install HDLM.
• If no multi-path management software other than HDLM is installed, click
the Next button to continue the installation.