HP Hitachi Dynamic Link Manager Software - Manual (Page 162)

3. Creating an HDLM Environment
138
\lib
After installing the JRE, check to make sure that the HDLM GUI starts.
Note:
• If you uninstall HDLM, HDLM-installation-folder
\jre_user
will be
deleted.
• If Hitachi Command Suite Common Agent Component is set to use a 32-bit
version of Java installed in the system, HDLM uses the specified version of
Java to start the HDLM GUI.
3.5.8 Firewall Settings for Managing HDLM by Using Global Link
Manager
To use Global Link Manager to manage HDLM when the host OS is Windows and
Windows Firewall is enabled, the following ports, which are used by the Hitachi
Command Suite Common Agent Component, must be registered as firewall
exceptions:
• Port set for the
server.agent.port
property (default: 24041/tcp)
• Port set for the
server.http.port
property (default: 24042/tcp)
• Port set for the
server.http.localPort
property (default: 24043/tcp)
For details about the ports used by the Hitachi Command Suite Common Agent
Component, see the manual Hitachi Global Link Manager Software Installation and
Configuration Guide.
To add the ports to the exceptions list:
1.
Log on as a member of the Administrators group.
2. Execute the
firewall_setup
command.
3. Check the displayed message to make sure that the command was executed
successfully.
The command ended successfully.
(1) firewall_setup command syntax
If the host OS is Windows, the
firewall_setup
command is used to register the
ports used by the Hitachi Command Suite Common Agent Component as firewall
exceptions.
The
firewall_setup
command is stored in the following locations:
installation-folder-for-Hitachi-Command-Suite-Common-agent-Com
ponent\bin\firewall_setup.bat
Table 3-13: firewall_setup command syntax describes the
firewall_setup