HP Hitachi Dynamic Link Manager Software - Manual (Page 70)

2. HDLM Functions
46
#1
For Windows Server 2003 (excluding the x86 edition) and Windows Server 2008
(excluding the x86 edition),
Program Files
is
Program Files (x86)
.
#2
The underlined part indicates the folder specified during the installation.
After obtaining these files, be sure to also copy them to a backup location.
For details on error levels, see 2.11.2 Filtering of Error Information.
Note
To collect logs, HDLM uses the Hitachi Network Objectplaza Trace Library
service. If this service is not active, start it by doing the following:
From Control Panel, choose Administrative Tools and then Services to open
the Services window. From the list of services, select Hitachi Network
Objectplaza Trace Monitor 2, and then from the Action menu choose Start.
Error log Error information is collected for the user-defined level. By
default, HDLM collects all error information.
HDLM Manager logs:
\Program
Files\HITACHI\DynamicLinkM
anager\log\dlmmgr[1-16].lo
g
#2
HDLM GUI logs:
\Program
Files\HITACHI\DynamicLinkM
anager\log\dlmgui[1-2].log
#2
Hitachi Command Suite Common
Agent Component logs:
\Program
Files\HITACHI\DynamicLinkM
anager\log\dlmwebagent[
1-n
].log
#2
The value n depends on a setting in
the file
dlmwebagent.properties
.
Event log Information about very severe errors (a severity level of
Critical
or
Error
) is collected.
You can use administrative tools such as Event Viewer to
check these event logs.
Event log (application log)
Log
name
Description Output destination