HP Hitachi Dynamic Link Manager Software - Manual (Page 144)

3. Creating an HDLM Environment
120
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(1)
Remove LU : off
Intermittent Error Monitor : off
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss 128
HDLM Driver Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
Even if you are using Oracle RAC,
off
appears for
Support Cluster
. Even if
this is the case, the cluster support function will run normally.
3.5.4 Performing a New Installation of HDLM on Windows Server
2008
Note:
If you are running a Windows Server 2008 Server Core environment, install
HDLM by performing an unattended installation.
(1) In a Non-Cluster Environment
Before installing HDLM, have a license key ready.
If you want to perform an unattended installation, also be sure to prepare an
installation-information settings file.
To install HDLM in a non-cluster environment:
1.
Log on to Windows as a member of the Administrators group.
2. Save the license key file directly under the Windows installation-destination
drive. Also, instead of using the license key file, you can directly specify a license
key during the installation of HDLM.
installation-drive
:\hdlm_license
The license key file will be deleted after the installation finishes.
3. Perform the installation.