HP Hitachi Dynamic Link Manager Software - Manual (Page 327)

7. Utility Reference
303
7.7 The installhdlm Utility for Installing HDLM
The
installhdlm
utility can perform a new installation, upgrade installation, or
re-installation of HDLM in the unattended installation mode. How the utility should
respond during an installation, and the HDLM function settings must be predefined in
an installation-information settings file.
You can also use this utility later to check the information that was set during
installation.
To perform an unattended installation, store the utility in the following location:
drive-where-the-installation-DVD-has-been-inserted
:\HDLM_Windows\DLMTools
The utility to display the information set during installation is stored in the following
location:
HDLM-installation-folder
\bin
For details about the procedure for performing an unattended installation, see
3.5.3 Performing a New Installation of HDLM on Windows Server 2003 or
3.5.4 Performing a New Installation of HDLM on Windows Server 2008.
7.7.1 Format
installhdlm {-f
installation-information-settings-file-name
[-c ]| -v| -h}
7.7.2 Parameters
-f
installation-information-settings-file-name
Sets the information required to perform an installation.
For details about the installation-information settings file, see 7.7.3 Contents of
an Installation-Information Settings File.
-c
Checks the contents of the installation-information settings file, the license, and
other necessary information, but does not perform an installation.
-v
Displays the information that was set during installation.
If the installation was performed without using the unattended installation
functionality, the information specified in a dialog box is displayed.
Example:
>installhdlm -v
installdir=C:\Program Files\HITACHI\DynamicLinkManager