HP Hitachi Dynamic Link Manager Software - Manual (Page 253)

6. Command Reference
229
indicates a file number of
1
or
2
)), the number of log files is set at
2
.
-systflv
trace-level
Specify the trace output level.
The trace files for which trace levels can be set are
hdlmtr
n
.log
(n indicates a
file number from
1
to
64
).
Table 6-4: Trace Level Values shows the values of the trace level. The default is
0
. If an error occurs, set the trace level to 1 or higher to collect the log information.
Table 6-4: Trace Level Values
The higher the error log collection level value, the more log information will be
output. As the amount of log information that is output increases, the amount of
time before existing information will be overwritten becomes shorter.
-systfs
trace-file-size
Specify the size of the trace file in kilobytes. Specify a value from 100 to 16000.
When combined with the specification for the number of trace files, the maximum
size of the trace files that can be collected is 1024000KB.
If the value is changed to something smaller than the value that is currently set,
the execution confirmation message KAPL01097-W will be displayed and the
trace file will be deleted temporarily.
The trace files for which a file size can be set are
hdlmtr
n
.log
(n indicates a file
number from
1
to
64
). The trace files are fixed in length. Thus, even if the amount
of written trace information is less than the setting file size, the size of each output
trace file is always the same. When all the trace files become full, the new trace
data will overwrite the oldest trace data.
-systfn
number-of-trace-files
Specify the number of trace files. Specify a value from 2 to 64.
When combined with the specification for the trace file size, the maximum total
size of the trace files that can be collected is 1024000KB.
Value Description
0
Does not output any trace.
1
Only outputs error information.
2
Outputs a summary of program operation.
3
Outputs details of program operation.
4
Outputs all information.