HP Hitachi Dynamic Link Manager Software - Manual (Page 298)

6. Command Reference
274
Parameters to display a summary of LU information:
-lu -c
When the
-c
parameter is specified with the
-lu
parameter, a summary of LU
configuration information is displayed on one line. The total number of paths
recognized by HDLM and the number of online paths are displayed for each LU.
Note that:
• For the Thunder 9500V series, Lightning 9900 series, Lightning 9900V
series, Hitachi USP, Hitachi AMS2000/AMS/WMS/SMS series, Universal
Storage Platform V/VM, and Virtual Storage Platform LU information is
displayed for each storage system.
• For the EMC DMX series and EMC CX series, LU information is displayed
for each vendor ID.
• For the HP EVA series, LU information is displayed for each
vendor_ID_product_ID.
You cannot specify the
-c
parameter together with the
-hdev
or
-pathid
parameter.
For details on the contents of each display item, see Table 6-18: Displayed LU
Information.
-exlu
• When an HDLM management-target device is the EMC DMX series,
EMC CX series, or HP EVA series: