HP StorageWorks 2.12 Edge Switch User Manual
Page 36
Element Manager Overview
36
Edge Switch Element Manager User Guide
IPL
Click this option to initiate an Initial Program Load on the switch. A dialog box
displays to allow you to confirm the IPL. Note that an IPL does not affect any
configuration settings done through the Element Manager. This operation does not
interrupt port operation.
See the “
” on page 164 for more information.
Set Online State
Click this option to display the Set Online State dialog box. Use this dialog box to
change the online state of the switch to offline or online.
Firmware Library
Click this option to display the Firmware Library dialog box. This dialog box
displays all firmware versions currently installed on the HAFM appliance that can
be downloaded to switches. Use this dialog box to add a new firmware version to
the HAFM appliance hard disk, modify the description displayed for an existing
version, delete a version from the appliance, or download (send) a version for
operation on a switch. At most, eight versions of the firmware can be stored in the
library.
For additional information on using the firmware library, refer to the following
documents:
■
HP StorageWorks Edge Switch 2/24 Installation Guide or HP StorageWorks
Edge Switch 2/24 Service Guide
or
■
HP StorageWorks Edge Switch 2/32 Installation Guide or HP StorageWorks
Edge Switch 2/32 Service Guide
Enable E-Mail Notification
The Simple Mail Transfer Protocol (SMTP) server and e-mail recipient addresses
are configured in HAFM (not in the Element Manager). E-mail notification is also
initially enabled in HAFM for all switches it manages. Note, however, that the
E-Mail Notification option on the Element Manager’s Maintenance menu must
be enabled (checked) for e-mail notification to occur for the specific switch.
The default setting for the Enable E-Mail Notification function is enabled
(checked). To disable the function, click Maintenance > Enable E-Mail
Notification to clear the check box.