HP StorageWorks 2.12 Edge Switch - Manual (Page 182)

Optional Features
182 Edge Switch Element Manager User Guide
5. Edit the Switch Membership List through the Switch Binding Membership
List dialog box to add or remove switches and devices that are allowed to
connect with the switch. See “
Editing the Switch Membership List ” on
page 182 for procedures.
Editing the Switch Membership List
Use the following procedure to edit the switch membership list:
1. Click Configure > Switch Binding > Edit Membership List. The Switch
Binding Membership List dialog box displays. The WWNs of devices and/or
switches that can currently connect to switch ports are listed in the Switch
Membership List panel.
Figure 62: Switch Binding Membership List dialog box
Note: See “ Configuring Switch Binding - Overview ” on page 180 for information on
how the Switch Membership List is populated with WWNs according to options set in
the Switch Binding State Change dialog box.