HP StorageWorks 2.12 Edge Switch - Manual (Page 201)

Information and Error Messages
201 Edge Switch Element Manager User Guide
Fabric member could
not be found.
A fabric member does
not exist when the
application prepared
to find a route, find a
route node, or gather
route information on
that fabric member.
Ensure the product is
incorporated into the fabric and
retry the operation. If the
problem persists, contact the
next level of support.
Fabric not persisted. You attempted to
refresh or clear the log,
after a fabric was
unpersisted. When you
unpersist a fabric, the
corresponding fabric
log is deleted.
Click OK to continue. Ensure
the fabric is persisted before
attempting to refresh or clear
the Fabric Log.
Field cannot be blank. The data field requires
an entry and cannot
be left blank.
Enter appropriate information
in the data field.
File transfer aborted. You aborted the file
transfer process.
Verify the file transfer is to be
aborted, then click OK to
continue.
HAFM error
number 1 through 8 >.
The HAFM application
encountered an
internal error (1
through 8 inclusive)
and cannot continue
operation.
Contact the next level of support
to report the problem.
Management server
could not log you on.
Verify your username
and password.
An incorrect username
or password (both case
sensitive) was used
while attempting to log
in to the HAFM
application.
Verify the username and
password with the customer’s
network administrator and retry
the operation.
Management server is
shutting down.
Connection will be
terminated.
The HAFM application
is closing and
terminating
communication with
the attached product.
Reboot the HAFM appliance. If
the problem persists, contact the
next level of support.
Invalid character in
field.
An invalid character
was entered in the
data field.
Remove invalid characters from
the entry.
Table 7: HAFM Messages (Continued)
Message Description Action