HP StorageWorks 2.12 Edge Switch - Manual (Page 212)

Information and Error Messages
212 Error Messages
You must define at
least one remote
network address.
At least one IP address
for a remote
workstation must be
configured for a
remote session to be
activated.
Define an IP address for at least
one remote workstation at the
Remote Access dialog box.
You must download the
HAFM client via the
web install.
An attempt was made
to download the
HAFM application to a
remote workstation
(client) using an
improper procedure.
Download a compatible version
of the HAFM application to the
remote workstation (client)
using the Web install
procedure.
Zones configured with
port numbers are
ignored in Open
Fabric Mode.
While in Open Fabric
mode, zones
configured using port
numbers are enforced
through World Wide
Names.
Informational message only–no
action is required.
Zones must be defined
before creating a zone
set.
You cannot create a
zone set without any
zones defined for
HAFM .
Define zones using the New
Zone dialog box.
Zoning by port number
is ignored in Open
Fabric Mode.
While in Open Fabric
mode, zones
configured using port
numbers are enforced
through World Wide
Names.
Informational message only–no
action is required.
Zoning by port number
is not supported in
Open Fabric Mode.
You cannot specify an
item for zoning by port
number if HAFM is in
Open Fabric Mode.
Either define zones by WWN of
device or change to
Homogeneous Fabric mode in
the Configure Operation Mode
dialog box of the Element
Manager.
Zoning name already
exists.
Duplicate zone names
are not allowed in the
zoning library.
Modify (to make it unique) or
delete the duplicate zone name.
Table 7: HAFM Messages (Continued)
Message Description Action