HP StorageWorks 2.12 Edge Switch - Manual (Page 132)

Configuring the Switch
132 Edge Switch Element Manager User Guide
2. Click Configure > Features. The Configure Feature Key dialog box displays.
Figure 38: Configure Feature Key dialog box
3. Click New to add a new feature key.
4. In the New Feature Key dialog box, enter the switch’s feature key and click
OK.
— Feature keys are only valid for a switch with a specific serial number.
They cannot be interchanged between switches. If an error stating
Invalid serial number displays, verify that you have entered the
feature key that was assigned to the switch. To verify, check the serial
number of the switch through the Switch Properties dialog box and
compare it to the serial number listed in the documentation provided with
your feature key. See“
Displaying Switch Information ” on page 68 for
instructions on displaying the Switch Properties dialog box.
— The feature key is a string of alphanumeric characters with dashes. The
key is case-sensitive, so enter the key exactly as printed in the
documentation that you received for the feature. If an error stating
Invalid feature key displays, verify that you have entered the
feature key correctly.
The Enable Feature Key dialog box ( Figure 39 ) displays with a warning,
stating that this action will override the current set of features on the switch.
The list in the left column of the dialog box is a list of features that are active
on the switch. The list on the right is a set of features that come with the new
feature key. All of the features that are active are included in the new feature
list.