HP StorageWorks 2.12 Edge Switch User Manual
Page 37

Element Manager Overview
37
Edge Switch Element Manager User Guide
For additional information on using this option, see “
Enable Call Home Notification
Click Maintenance > Enable Call Home Notification to enable the call-home
function for the switch. The parameters of the call-home feature are configured in
Windows
®
. Refer to the HP StorageWorks HA-Fabric Manager Appliance
Installation Guide for instructions.
For additional information on using this option, see “
Backup & Restore Configuration
Click this option to save the product configuration stored on the switch to the
HAFM appliance hard disk or to restore the configuration data from the appliance.
Only a single copy of the configuration is kept on the appliance.
This backup is primarily for single-control processor (CTP) systems, where a
backup is needed to restore the configuration data to a replacement CTP card. You
cannot modify the location or the file name of the saved configuration.
For additional information on using this option, see “
Note:
You can only restore the configuration to a switch with the same IP address.
Reset Configuration
Click this option to reset all switch configuration data back to the factory defaults.
When you choose this option, a confirmation dialog box displays with a warning.
For additional information on using this option, see “
Caution:
This operation resets all configuration data, including any optional
features that have been installed. You will need to re-enter your feature key to
enable all optional features after resetting the configuration.