HP StorageWorks 2.12 Edge Switch - Manual (Page 200)

Information and Error Messages
200 Error Messages
Error connecting to
switch.
While viewing routes,
the HAFM appliance
was unable to connect
to the switch. The
switch failed or the
switch-to-HAFM
appliance Ethernet link
failed.
Try the operation again. If the
problem persists, contact the
next level of support.
Error creating zone. The HAFM application
encountered an
internal error.
Try the operation again. If the
problem persists, contact the
next level of support.
Error creating zone set. The HAFM application
encountered an
internal error.
Try the operation again. If the
problem persists, contact the
next level of support.
Error deleting zone. The HAFM application
encountered an
internal error.
Try the operation again. If the
problem persists, contact the
next level of support.
Error deleting zone set. The HAFM application
encountered an
internal error.
Try the operation again. If the
problem persists, contact the
next level of support.
Error reading log file. The HAFM application
encountered an error
while trying to read the
log.
Try the operation again. If the
problem persists, contact the
next level of support.
Error removing zone or
zone member.
The HAFM application
encountered an
internal error.
Try the operation again. If the
problem persists, contact the
next level of support.
Error transferring files
< message >.
An error occurred
while transferring files
from the PC hard drive
to the HAFM
application. The
message varies,
depending on the
problem.
Try the file transfer operation
again. If the problem persists,
contact the next level of support.
Fabric Log will be lost
once the fabric
unpersists. Do you
want to continue?
When you unpersist a
fabric, the
corresponding fabric
log is deleted.
Click Yes to unpersist the fabric
or No to cancel the operation.
Table 7: HAFM Messages (Continued)
Message Description Action