HP StorageWorks 2.12 Edge Switch - Manual (Page 58)

Monitoring and Managing the Switch
58 Edge Switch Element Manager User Guide
— Protocol Mismatch—The switch and the HAFM appliance are not at
compatible software release levels. Update the HAFM software version or
your product’s firmware so that they are at compatible levels.
— Duplicate Session—A link has previously been established between the
switch and another instance of the HAFM appliance. Connect to the
previously established HAFM appliance from the HAFM login screen.
— Unknown Network Address—The address defined for the switch in
HAFM could not be found in the domain name server (DNS). Either the
name was mistyped when the switch was added to the application, or the
name was not available from the DNS. Check the network IP address for
the switch definition in HAFM by right-clicking the product icon and
clicking Properties. The IP address displays in the Network Address
field.
— Incorrect Product Type—The product at the configured network address
is not a switch. Verify address, configuration, and product type.
Status Bar Status Indicator
The status bar displays a colored status symbol that indicates the overall operating
status of the switch unit. The operating status depends on hardware component
failures, which are indicated by status symbols that display over component
graphics in the Hardware View. See “
Hardware View ” on page 56 for the
meanings of status symbols in the status bar.
The status bar indicates the switch operating status based on component failures.
For example, a yellow triangle displays in the status bar to indicate a degraded
switch. However, if a blinking red and yellow diamond displays over both power
supplies, the status bar displays a red and yellow diamond, indicating a failure that
requires immediate attention.