14 configure date and time (manually) dialog box – HP StorageWorks 2.12 Edge Switch User Manual

Page 71

Monitoring and Managing the Switch

2. Perform one of the following steps:

— To immediately synchronize the switch date and time with the HAFM

appliance, make sure the Periodic Date/Time Synchronization option is
enabled and then click Sync Now.

Note:

If you enable the Periodic Date/Time Synchronization feature and click

Activate, the time will synchronize at the next update period.

— To set the switch with a specific date and time, make sure that the

Periodic Date/Time Synchronization field is not selected, as shown in

. Enter the date and time, and then click Activate.

Figure 14: Configure Date and Time (manually) dialog box

Note:

Use the range of 0 to 23 for hours. Use the range of 0 to 59 for minutes and

seconds.

■

Set Switch Online State—Use the following procedure to set the online state
of the switch.

Caution:

Before setting the switch offline, warn administrators and users

currently operating attached devices that the switch is going offline and that

there will be a disruption of port operation. Also, request that the devices

affected by an interruption of data flow be set offline.

1. Click to display the Set Online State dialog box. The dialog box displays the

current state (offline or online) and provides a button for changing the state.

This manual is related to the following products: