HP StorageWorks 2.12 Edge Switch - Manual (Page 169)

Using Maintenance Features
169 Edge Switch Element Manager User Guide
■ SNMP configuration (trap recipients, community names, and write
authorizations).
■ Zoning configuration (active zone set and default zone state).
2. To back up data, click Backup.
3. When the dialog box displays confirming that the backup is complete, click
OK. If the backup fails, a dialog box displays to inform you that the backup to
the HAFM appliance failed.
Restore Procedure
Use the following procedure to restore your product configuration:
1. Set the switch offline before performing the restore function.
2. Click Restore on the Backup and Restore Configuration dialog box to
restore the backed up configuration to the nonvolatile random access memory
(NV-RAM) on the switch. Note that the restore operation initiates an IPL. See
“
Execute an IPL ” on page 164 for more information about IPLs.
Note: Set the switch to offline before performing the restore function. If you click
Restore and the switch is online, a message dialog displays requesting that you turn the
switch offline. No action takes place when you close the dialog box. For instructions on
setting the switch offline or online, see “ Set Online State ” on page 166.
If the switch is already offline and you click the Restore button, a confirmation dialog
box displays indicating that the restore will overwrite any existing configuration already
on the switch. The dialog box also displays the date of the restored backup. Click OK.